In Brief

Pacific Seacraft Orion27 Sail Plan Beautiful, strong, and capable the Orion 27, introduced in 1979, was one of the earlier boats to come from the well trusted Pacific Seacraft stable. Pacific Seacraft built its reputation on robust boats constructed with attention to detail. It was notable for being the last design by Henry Mohrschladt, who was one of the two original founders of Pacific Seacraft. Built in California, most examples to this day can be found on the West Coast and at least one has circumnavigated. Brec Morgan set out in Otter in 1998, visiting over 50 countries before completing his odyssey in 2003.

Unsurprisingly for a Mohrschladt design, the Orion 27 has conservative lines. Under the waterline is a long keel with a forefoot cutaway to improve nimbleness and reduce wetted area. The sections carry the tried and true wine-glass shape. Don’t expect record setting pace with this kind of shape; think strong, safe, and good manners for heaving-to in the rough. There’s a 6’1″ bowsprit to help carry her canvas and the rig came in 3 variations; sloop, yawl, and cutter. The cutter rig, best suited to longer distance sailing has a self tending staysail.

Layout and Variations

In addition to the three rig options, Pacific Seacraft offered two cabin layouts, and steering in tiller or wheel; note most examples are found with wheel steering. In 1981 an improved MkII version was introduced with a longer coachroof, two deck hatches, and an extra set of portlights.

Pacific Seacraft Orion27 Interior Layout The two layouts were named “A” and “C”. Both have a double v-berth, a hanging locker, a head, and a quarter-berth. A shower located in the head was an optional extra as was a pressurized water system for it.

The A-layout is more common and has a relatively roomy U-shaped dinette to port, lowering the dinette table converts the area into a double berth. On the starboard side is the galley with a nav-station further aft.

The C-layout was designed for longer cruises. Here the U-shaped dinette is sacrificed to gain room for a larger head and shower combo as well as providing space for a larger v-berth and more stowage in the forward sections. At the bottom of the companionway is a wet locker.

Construction

Through the years the boat has proven to be of sturdy construction. The hull is of hand-laid fiberglass and the decks are of glass cored with plywood. The hull to deck join is a double-flange bedded in polyurethane adhesive, thru-bolted with stainless bolts. This forms the bulwarks which encloses the deck and is capped in teak.

Specifications

LOA: 30′ 11″ (including bowsprit)
LOD: 27′ 4″
LWL: 22′ 2″
Beam: 9′ 3″
Draft: 4′ 0″
Displacement: 10,000 lbs.
Ballast: 3,500 lbs.
Sail Area, Sloop: 428 sq.ft.
Sail Area, Yawl: 452 sq.ft.
Sail Area, Cutter: 508 sq.ft.
Bridge Clearance: 40′ 11″

Headroom: 6′ 2″
Engine: Yanmar 2GM 13hp diesel
Fuel: 20 US Gal.
Water: 70 US Gal.
Holding: 18 US Gal.

Designer: Henry Mohrschladt
Builder: Pacific Seacraft
Year Introduced: 1979
Year Ended: 1993

Similar Boats

Shannon 28
Roberts Tom Thumb 26

Links, References, and Further Reading

» Orion 27 Owners Yahoo Group
» A Field Guide to Sailboats of North America by Richard M. Sherwoo, p192

Gallery

Want your boat pics featured here? Send them to us (1024x768 or better) at [email protected] or post them to our Facebook Page.

Please contribute additional information about this boat...

Add your stories, experiences, tidbits, updated information - whatever you think is useful to others.

One Response to “Pacific Seacraft Orion 27”

  1. John Smith says:

    I believe the correct spelling for Henry’s last name is Mohrschladt. I know it’s spelled Morschadt on a lot of websites, but I think they are in error.

Leave a Reply